RIFF JTAG | LG SH860 Supported

Tweet

Share

RIFF JTAG | LG SH860 Supported

Resurrecting LG SH860 is easy. To establish connector battery must be connected and Power On key to be pressed. 

To resurrect LG SH860:

•  Solder JTAG cable to LG SH860 JTAG pads;
•  Insert battery;
•  Make sure LG SH860 is selected in the list of models;
•  Click Resurrect button;
•  Press ‘Power ON’ key;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter emergency mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘5’ key and press ‘Power ON’ button. In few seconds you should see emergency mode screen.

Posted in: Box Flasher News